Concrete Color - EZ-Tique Antiquing Wash 3 LB Bucket

Concrete Color – EZ-Tique Antiquing Wash 3 LB Bucket

Name: Concrete Color - EZ-Tique Antiquing Wash 3 LB Bucket
SKU: 4909
Price: 38.00 USD
Availability: InStock

$38.00

Proline EZ-Tique is a water-based antiquing wash that adds depth and contrast to stamped and textured concrete. Use it on newly textured concrete or properly prepared existing surfaces to highlight stone, brick, wood, and other decorative patterns.

Coverage: Approximately 2,000–3,000 sq. ft. per 3 lb bucket, depending on application.

Choose your color below and review the color chart and application instructions before ordering.

Colors are approximate; all devices/ screens are different

DOWNLOAD EZ-Tique Top 20 Color Chart

DOWNLOAD EZ-Tique Application Instructions

Color

Clear

Authorized Dealer

Easy 30-Day Returns

Expert Support

Secure Checkout

Category: Concrete Stamping Colors

Description
Reviews (0)

Description

Bring out the detail in stamped concrete with EZ-Tique Antiquing Wash.

Proline EZ-Tique adds secondary color to stamped and textured concrete, highlighting recessed patterns and creating a natural, antiqued finish. The water-based cementitious powder mixes with water and can be used on new concrete or properly prepared older surfaces that need their antiquing color refreshed.

Choose from over 11+ popular colors to complement flagstone, slate, brick, wood plank, and other stamped concrete patterns.

Working with existing concrete? The surface must be clean, porous, and free of existing sealers or coatings that could interfere with the antiquing wash. Test a small area before application to confirm color and absorption.

Once the antiquing wash and concrete are fully dry, apply a compatible Proline concrete sealer to protect the finished surface. Follow the product’s technical data and application instructions for preparation, mixing, application, and sealing.

DURA EZ TIQUE TECH DATA

Product Type

Water-based cementitious antiquing wash for stamped and textured concrete

Coverage

Approx. 2,000–3,000 sq. ft. per 3 lb bucket

Mix Ratio

1 scoop per gallon of water

Color Control

Blend or layer multiple secondary colors to create more natural color variation and depth

Surface Prep

Concrete must be clean, sound and porous. Existing sealers, coatings, peeling material and other bond-breaking contaminants must be completely removed. Test a small area first for absorption and compatibility

Application

Lightly pre-moisten the surface, apply EZ-Tique evenly and distribute with a clean soft bristle brush, or spray on

During Application

Keep the mixture agitated to help prevent pigment from settling. Do not walk on drying or dry areas with wet footwear, as moisture can leave visible marks

Color Check

The wet appearance can provide a useful preview of the sealed color. If the color is too heavy or uneven, adjust, redistribute or rinse with clean water before it dries

Dry Buffing / Final Prep

Once dry, use a clean dry buffer pad to highlight the high spots before sealing

Dry Before Sealing

Allow EZ-Tique and the concrete to dry completely before sealing. Allow at least 24 hours under warm, dry conditions and additional time in cool, humid, shaded or low-airflow conditions

Sealer Options

Protect the finished surface with a compatible Proline sealer. Consider Nature Shield for a natural, color-enhancing lower-gloss finish or Dura-Seal where a glossy film-forming finish is preferred

VOC

Zero VOC