Description
Available in over 40 standard designer colors, EZ-Tique can be easily applied and holds fast to textured concrete. It can be used on recently finished concrete or to revitalize an older textured surface.
CONTRACTOR INFO
EZ-Tique Contractor Quick Specs
The jobsite information contractors need before ordering and applying EZ-Tique.
Product Type
Water-based cementitious antiquing wash for stamped and textured concrete
Coverage
Approx. 2,000–3,000 sq. ft. per 3 lb bucket
Mix Ratio
1 scoop per gallon of water
Color Control
Blend or layer multiple secondary colors to create more natural color variation and depth
Surface Prep
Concrete must be clean, sound and porous. Existing sealers, coatings, peeling material and other bond-breaking contaminants must be completely removed. Test a small area first for absorption and compatibility
Application
Lightly pre-moisten the surface, apply EZ-Tique evenly and distribute with a clean soft bristle brush, or spray on
During Application
Keep the mixture agitated to help prevent pigment from settling. Do not walk on drying or dry areas with wet footwear, as moisture can leave visible marks
Color Check
The wet appearance can provide a useful preview of the sealed color. If the color is too heavy or uneven, adjust, redistribute or rinse with clean water before it dries
Dry Buffing / Final Prep
Once dry, use a clean dry buffer pad to highlight the high spots before sealing
Dry Before Sealing
Allow EZ-Tique and the concrete to dry completely before sealing. Allow at least 24 hours under warm, dry conditions and additional time in cool, humid, shaded or low-airflow conditions
Sealer Options
Protect the finished surface with a compatible Proline sealer. Consider Nature Shield for a natural, color-enhancing lower-gloss finish or Dura-Seal where a glossy film-forming finish is preferred
VOC
Zero VOC
EZ-Tique Color Progression
See how the appearance changes from fresh concrete through the final sealed finish.
1. Fresh Concrete
Before EZ-Tique application
2. EZ-Tique Wet
During application
3. EZ-Tique Dry
After drying, before sealer
4. Sealed Finish
Final appearance after sealing
Contractor Tip: The appearance of EZ-Tique will change as it dries and again after sealer is applied.
Reviews
There are no reviews yet.